Aluminum angles, coping, anchor plugs
Aluminum sheet angles for eaves and verges
Waterproof layer terminal pressing hardware specialized for eaves and verges
Aluminum waterproof layer terminal pressing hardware, firmly holding and fixing waterproof layers, realizes weather resistance and corrosion resistance as the surface is alumite-treated, while being lightweight and excellent in workability. A wide selection of sizes allows for a wide variety of applications.
Aluminum sheet angles for eaves and verges exert outstanding effects to hold waterproof layer ends especially around eaves for various types of sheet waterproofing.
///Points of aluminum sheet angles for eaves and verges///
- 1. Perfect flashing; For imperfect sealing performance, compensation cap covers three-times to four-times for extra protection.
- 2. Outstanding durability; Alumite-finished aluminum alloy
- 3. Excellent workability; One-touch cap installation to angle body
- 4. Wide-ranging versatility; Compatible with PVC sheet, rubber sheet, coating film, cold asphalt waterproofing
- 5. Beautiful finish; Keeps rooftops clean with an excellent waterproofing mechanism and beautiful finish
Details
-
Aluminum sheet angles for verges TA-114
-
Image
-
Drawing
Thickness: 1.5 Spec: 72×120×2,000
for verges
Inner joints (large and small) provided (bent material)｜External corner and internal corner provided｜Inner joint (small) silver only
*Please select either large or small joints.
Electrolytic bronze in stock｜Electrolytic black in stock
-
-
Aluminum sheet angles for verges TA-114L
-
Image
-
Drawing
Thickness: 1.5 Spec: 97.6×120×2,000
for verges
Inner joints (large and small) provided (bent material)｜External corner and internal corner provided
Electrolytic bronze in stock｜Electrolytic black in stock｜Inner joint (small) silver only
-
-
Aluminum sheet angles for eaves TA-116
-
Image
-
Drawing
Thickness: 1.8 Spec: 50×135×2,000
for eaves
Inner joint provided (bent material)｜External corner and internal corner provided
Electrolytic bronze in stock｜Electrolytic black in stock
-
-
Aluminum sheet angles for eaves TA-116L
-
Image
-
Drawing
Thickness: 1.8 Spec: 75×135×2,000
for eaves
Inner joint provided (bent material)｜External corner and internal corner provided
Electrolytic bronze in stock｜Electrolytic black in stock
-
-
Aluminum sheet angles for eaves TA-119
-
Image
-
Drawing
Thickness: 1.5 Spec: 50×135×2,000
for eaves
Inner joint provided (bent material)｜External corner and internal corner provided
-
