Aluminum angles, coping, anchor plugs
Aluminum flats
Perfect for use on flat surfaces!
Aluminum waterproof layer terminal pressing hardware, firmly holding and fixing waterproof layers, realizes weather resistance and corrosion resistance as the surface is alumite-treated, while being lightweight and excellent in workability. A wide selection of sizes allows for a wide variety of applications.
Aluminum flats exert outstanding effects to hold waterproof layer ends especially in areas requiring use on flat surfaces, such as parapets and around eaves, for various sheet waterproofing and asphalt waterproofing works.
///Points of aluminum flats///
- 1. Perfect flashing; For imperfect sealing performance, compensation cap covers three-times to four-times for extra protection.
- 2. Outstanding durability; Alumite-finished aluminum alloy
- 3. Excellent workability; One-touch cap installation to angle body
- 4. Wide-ranging versatility; Compatible with PVC sheet, rubber sheet, coating film, cold asphalt waterproofing
- 5. Beautiful finish; Keeps rooftops clean with an excellent waterproofing mechanism and beautiful finish
Details
-
Aluminum flats TF-1
-
Image
-
Drawing
Thickness: 2.0 Spec: 100×2,000
-
-
Aluminum flats TF-2
-
Image
-
Drawing
Thickness: 1.5 Spec: 30×2,000
-
-
Aluminum flats TF-3
-
Image
-
Drawing
Thickness: 2.0 Spec: 30×2,000
-
-
Aluminum flats TF-4
-
Image
-
Drawing
Thickness: 1.5 Spec: 6.5×34×2,000
-
-
Aluminum flats TF-4×43
-
Image
-
Drawing
Thickness: 2.0 Spec: 4×30×2,000
-
-
Aluminum flats TF-5
-
Image
-
Drawing
Thickness: 1.7 Spec: 5×30×2,000
-
-
Aluminum flats TF-5×5
-
Image
-
Drawing
Thickness: 1.5 Spec: 5×30×2,000
-
-
Aluminum flats TF-6
-
Image
-
Drawing
Thickness: 2.0 Spec: 5×25×2,000
-
-
Aluminum flats TF-7
-
Image
-
Drawing
Thickness: 2.0 Spec: 50×2,000
-
-
Aluminum flats TF-8
-
Image
-
Drawing
Thickness: 1.5 Spec: 5×30×2,000
-
-
Aluminum flats TF-9
-
Image
-
Drawing
-
Drawing
Thickness: 6.0 Spec: 50×2,000
-
-
Aluminum flats TF-10
-
Image
-
Drawing
-
Drawing
Thickness: 6.0 Spec: 40×60×2,000
-
-
Aluminum flats TF-11
-
Image
-
Drawing
-
Drawing
Thickness: 2.0 Spec: 8×35×2,000
-
-
Aluminum flats TF-12
-
Image
-
Drawing
Thickness: 3.0 Spec: 30×2,000
-
