Aluminum angles, coping, anchor plugs
End braces
Perfect for use on flat surfaces!
Aluminum waterproof layer terminal pressing hardware, firmly holding and fixing waterproof layers, realizes weather resistance and corrosion resistance as the surface is alumite-treated, while being lightweight and excellent in workability. A wide selection of sizes allows for a wide variety of applications.
///Points of end braces///
- 1. Perfect flashing; For imperfect sealing performance, compensation cap covered three-times to four-times for extra protection.
- 2. Outstanding durability; Alumite-finished aluminum alloy
- 3. Excellent workability; One-touch cap installation to angle body
- 4. Wide-ranging versatility; Compatible with PVC sheet, rubber sheet, coating film, cold asphalt waterproofing
- 5. Beautiful finish; Keeps rooftops clean with an excellent waterproofing mechanism and beautiful finish
Details
-
TO-301 set（TO301, cap）
-
Image
-
Drawing
-
Drawing
Thickness: 1.5 Spec: 55×72.5×2,000
Outer joint provided (section bar)｜External corner and internal corner provided
Straight with 8 holes 6mm in diameter,
both ends 50mm from the center of the nearest hole. No corner holes.*Servo screws can be used.
*Keep in mind the screw head spec. The cap may not fit depending on the spec. -
-
Cap
-
Image
-
Drawing
Thickness: 0.8 Spec: 6.5×17.3×2,000
-
